- Department of Reinforced Concrete Structures and Geotechnics
- Department of Construction Management and Real Estate
- Department of Building Materials and Fire Safety
- Department of Applied Mechanics
- Department of Steel and Composite Structures
- Institute of Building Materials
- Institute of Building and Bridge Structures
- Institute of Sustainable Construction
- Applied Laboratory of Buildings, Constructions and Materials
- Laboratory of Building Structures and Geotechnics
- Laboratory of Structural Models
Studies
Department of Structural mechanics holds specialization "Structural Optimization and Computer-aided Design" of Structural Engineering study programme (Master degree studies) .
Together with departments of Steel and Timber Structures and Reinforced Concrete and Masonry Structures hold specialization "Structural and Design Management" of Civil Engineering study programme (Bachelor degree studies).
Defended Bachelor Final Theses in Structural Mechanics Department:
1998
A.Grigusevičius. Evaluation of carrying power reserve and design of foundation-basement in administrative building. Supervisor A.Krutinis.
V.Juodagalvis Stress strain state analysis of Vilnius biological cleaning system industrial block structures. Supervisor R.Karkauskas.
V.Juodagalvis Stress strain state analysis of Vilnius biological cleaning system industrial block structures. Supervisor R.Karkauskas.
1999
E. Mazgelis Stress strain state analysis of building structures in Panevėžys and Kupiškis. Supervisor R. Karkauskas.
D. Merkevičiūtė. Motor transport trade center in Vilnius . Supervisor J. Atkočiūnas.
N. Moškov. Stress strain state analysis of five storey hotel carrying structures on elastic basement. Supervisor A. Krutinis. K. Urbonas. Medical storehouse with office. Supervisor V. Skaržauskas.
A. Voldemaras. Structural analysis of Blessed J. Matulaitis church parish house. Supervisor S. Kalanta.
D. Merkevičiūtė. Motor transport trade center in Vilnius . Supervisor J. Atkočiūnas.
N. Moškov. Stress strain state analysis of five storey hotel carrying structures on elastic basement. Supervisor A. Krutinis. K. Urbonas. Medical storehouse with office. Supervisor V. Skaržauskas.
A. Voldemaras. Structural analysis of Blessed J. Matulaitis church parish house. Supervisor S. Kalanta.
2000
N. Brazdžius. Stress strain state analysis and structural optimization of “Alna” administrative building. Supervisor R. Karkauskas.
R. Selickytė. Ceiling reconstruction of Lithuanian national philharmonic little hall. Supervisor V. Skaržauskas.
J. Mačiulytė. Optimization of carrying structures and stress strain state analysis of foundation- basement in restaurant “Gintaras”. Supervisor A. Krutinis.
A. Venskus. Design and optimization of Vilnius storehouse carrying structures. Supervisor J. Atkočiūnas.
R. Selickytė. Ceiling reconstruction of Lithuanian national philharmonic little hall. Supervisor V. Skaržauskas.
J. Mačiulytė. Optimization of carrying structures and stress strain state analysis of foundation- basement in restaurant “Gintaras”. Supervisor A. Krutinis.
A. Venskus. Design and optimization of Vilnius storehouse carrying structures. Supervisor J. Atkočiūnas.
2001
V. Vinckevičiūtė. Optimization and stress strain state analysis of Vilnius water cleaning system administrative building. Supervisor R. Karkauskas.
2002
S. Kubiliūtė. Motor transport trade and service center. Supervisor V. Skaržauskas.
2003
O. Chabarova. Dolomite mill in Klaipėda. Supervisor V. Skaržauskas. 2003 m.
2004
D. Kardokas. Reconstruction of furniture centre official accommodation and storehouse. Supervisor J. Nagevičius.
G. Platkevičius. Supermarket in Vilnius. Supervisor doc. V. Skaržauskas.
G. Kurmin. Reconstruction of adiministrative building in Petrašiūnai. Supervisor R. Karkauskas.
M. Alyta. Reconstruction of public building structures. Supervisor A. Krutinis.
J. Pudriakov. Control center of motor transport in Šalčininkai. Supervisor J. Nagevičius.
I. Bagdonas. Exhibition center in Vilnius. Supervisor S. Kalanta.
G. Platkevičius. Supermarket in Vilnius. Supervisor doc. V. Skaržauskas.
G. Kurmin. Reconstruction of adiministrative building in Petrašiūnai. Supervisor R. Karkauskas.
M. Alyta. Reconstruction of public building structures. Supervisor A. Krutinis.
J. Pudriakov. Control center of motor transport in Šalčininkai. Supervisor J. Nagevičius.
I. Bagdonas. Exhibition center in Vilnius. Supervisor S. Kalanta.
2005
M. Palumickas. Covered storehouse of building materials in Vilnius. Supervisor V. Skaržauskas.
V. Cvirka.Reconstruction of iron removal system building of “Kaunas vandenys”. Supervisor R. Karkauskas.
M. Žygelis. “Volvo” service center of trucks and buses. Supervisor J. Nagevičius.
V. Jankovski. Cover of building inner yard in Vilnius. Supervisor V. Skaržauskas.
P. Jurevičius. Evaluation of industrial building structural carrying power in Vilnius. Supervisor A. Krutinis.
V. Cvirka.Reconstruction of iron removal system building of “Kaunas vandenys”. Supervisor R. Karkauskas.
M. Žygelis. “Volvo” service center of trucks and buses. Supervisor J. Nagevičius.
V. Jankovski. Cover of building inner yard in Vilnius. Supervisor V. Skaržauskas.
P. Jurevičius. Evaluation of industrial building structural carrying power in Vilnius. Supervisor A. Krutinis.
2006
I. Misiūnaitė. Structural analysis and design of wellness complex. Supervisor V. Skaržauskas.
D. Simanavičiūtė. The building of store “Iki” in Kaunas. Supervisor J. Nagevičius.
D. Simanavičiūtė. The building of store “Iki” in Kaunas. Supervisor J. Nagevičius.
2007
R. Alutytė. Structural optimization and design of Kaunas water improvement station building. Supervisor R. Karkauskas
2008
S. Olševskaja. Design of storehouses on the field of dangerous medical waste acceptance and removal. Supervisor R. Karkauskas.
L. Kunikauskas. Small products warehouse with administration lodging in Švepeliai village. Supervisor J. Nagevičius.
A. Akimcev. Factory of dangerouse medical waste acceptance and removal. Supervisor R. Karkauskas.
A. Kublickas. Reconstruction of sport complex in Vilkaviškis. Supervisor V. Skaržauskas.
K. Bazys. Truck service center in Klaipėda district. Supervisor V. Skaržauskas.
T. Ulitinas. The technical service station in Vilnius. Supervisor S. Kalanta.
M. Juknys. Optimization problems of office building with storeyhouse in Klemiškės village, Klaipėda district. Supervisor R. Karkauskas.
L. Kunikauskas. Small products warehouse with administration lodging in Švepeliai village. Supervisor J. Nagevičius.
A. Akimcev. Factory of dangerouse medical waste acceptance and removal. Supervisor R. Karkauskas.
A. Kublickas. Reconstruction of sport complex in Vilkaviškis. Supervisor V. Skaržauskas.
K. Bazys. Truck service center in Klaipėda district. Supervisor V. Skaržauskas.
T. Ulitinas. The technical service station in Vilnius. Supervisor S. Kalanta.
M. Juknys. Optimization problems of office building with storeyhouse in Klemiškės village, Klaipėda district. Supervisor R. Karkauskas.
2009
L. Katelnikova. Research of carrying structures of Alytus supermarket. Supervisor V. Skaržauskas.
A. Čibičik. Annex of trade center in Klaipėda. Supervisor J. Nagevičius.
G. Jarašūnaitė. Administrative-industrial building of melioration station in Pakruojis. Supervisor R. Karkauskas.
E. Kurpytė. Annex of firm “Hansa flex” storehouse. Supervisor R. Karkauskas.
J. Krušna. Storehouse of building materials in Vilnius. Supervisor V. Skaržauskas.
T. Gesevičius. Design of raw mill steel structures in N. Akmenė. Supervisor V. Skaržauskas.
A. Čibičik. Annex of trade center in Klaipėda. Supervisor J. Nagevičius.
G. Jarašūnaitė. Administrative-industrial building of melioration station in Pakruojis. Supervisor R. Karkauskas.
E. Kurpytė. Annex of firm “Hansa flex” storehouse. Supervisor R. Karkauskas.
J. Krušna. Storehouse of building materials in Vilnius. Supervisor V. Skaržauskas.
T. Gesevičius. Design of raw mill steel structures in N. Akmenė. Supervisor V. Skaržauskas.
2010
L. Liepa. Optimization of structures in trade center “MAXIMA” at Kretinga. Supervisor prof. R. Karkauskas.
I. Kuoja. Designing and Analysis of DAF Truck Service Centre Steel structures. Supervisor V. Skaržauskas.
D. Norkus. Designing and Optimization of the Warehouse in Klaipėda Loadbearing Steel Structures. Supervisor V. Skaržauskas.
A. Pelutytė. Service company of motor transport. Supervisor Prof. R. Karkauskas.
I. Kuoja. Designing and Analysis of DAF Truck Service Centre Steel structures. Supervisor V. Skaržauskas.
D. Norkus. Designing and Optimization of the Warehouse in Klaipėda Loadbearing Steel Structures. Supervisor V. Skaržauskas.
A. Pelutytė. Service company of motor transport. Supervisor Prof. R. Karkauskas.
2011
J. Burbo. Store of automobile glass in Vilnius District. Supervisor R. Karkauskas.
N. Tuinyla. Designing of Administrative Building in Marijampolė Loadbearing Steel Structures. Supervisor R. Karkauskas
N. Tuinyla. Designing of Administrative Building in Marijampolė Loadbearing Steel Structures. Supervisor R. Karkauskas
2012
I. Efremov. Design and optimization of commercial building in Rumšiškės. Supervisor T. Ulitinas.
J. Zagoniajev. Supermarket in Ukmergė. Supervisor M. Popov
J. Zagoniajev. Supermarket in Ukmergė. Supervisor M. Popov
Defended Masters Final Theses in Structural Mechanics Department:
2000
A. Grigusevičius. Stress strain state analysis methods of elastic systems “basement-foundation”. Supervisor A. Krutinis.
V. Juodagalvis. Optimization of elastic-plastic structures accounting displacement constraints. Supervisor R. Karkauskas.
V. Juodagalvis. Optimization of elastic-plastic structures accounting displacement constraints. Supervisor R. Karkauskas.
2001
D. Merkevičiūtė. Optimization of elastic plastic shakedown frames load. Supervisor J. Atkočiūnas.
2002
A. Venskus. Application of nonlinear programming in problems of bendable plastical plates analysis. Supervisor J. Atkočiūnas.
J. Mačiulytė. Integrated research of stress strain state of reconstructable bund structures. Supervisor A. Krutinis.
J. Mačiulytė. Integrated research of stress strain state of reconstructable bund structures. Supervisor A. Krutinis.
2003
V. Vinckevičiūtė. Optimization of bar structures taking into account plastical deformations and displacement constraints. Supervisor R. Karkauskas.
2005
I. Dapševičiūtė. Optimization adaptable framed structures: mobile loading case. Supervisor J. Atkočiūnas.
R. Janulevičius. Optimization of building steel structures. Supervisor S. Kalanta.
M. Popov. FEM truss optimization algorithm and its realization using computer technologies. Supervisor R. Karkauskas.
J. Stankevičius. Design of bar structures accounting thermal deformations. Supervisor L. Rimkus.
A. Stašauskas. Optimization of bar structures under accidental load. Supervisor A. Norkus.
R. Janulevičius. Optimization of building steel structures. Supervisor S. Kalanta.
M. Popov. FEM truss optimization algorithm and its realization using computer technologies. Supervisor R. Karkauskas.
J. Stankevičius. Design of bar structures accounting thermal deformations. Supervisor L. Rimkus.
A. Stašauskas. Optimization of bar structures under accidental load. Supervisor A. Norkus.
2006
V. Česonytė. Optimization of rigid-plastic frame evaluating the influence of the partial strength joints on the distribution of internal forces. Supervisor V. Popov.
A. Gustys. Geometrically nonlinear truss type structures optimization under complex constraints. Supervisor R. Karkauskas.
D. Kardokas. Discrete optimization of beam structures. Supervisor S. Kalanta.
G. Platkevičius. Elastic-plastic frame optimization algorithm under stiffness constraints by FEM. Supervisor R. Karkauskas.
A. Gustys. Geometrically nonlinear truss type structures optimization under complex constraints. Supervisor R. Karkauskas.
D. Kardokas. Discrete optimization of beam structures. Supervisor S. Kalanta.
G. Platkevičius. Elastic-plastic frame optimization algorithm under stiffness constraints by FEM. Supervisor R. Karkauskas.
2007
V. Jankovski. MATLAB implementation of Finite Element Method (FEM) Toolkit for optimal steel frames design. Supervisor J. Atkočiūnas.
A. Rinkevičius. Truss type optimization of structures accounting for codified design principles. Supervisor A. Norkus.
A. Šeluchin. Optimization of shakedown frames under stiffness constraints.
A. Rinkevičius. Truss type optimization of structures accounting for codified design principles. Supervisor A. Norkus.
A. Šeluchin. Optimization of shakedown frames under stiffness constraints.
2008
G. Rauličkis. Design of bar structures under temperature changes. Supervisor L. Rimkus.
2009
E. Maksimovič. Load optimization of elastic-plastic bendable plates: mathematical models and solution algorithms. Supervisor J. Atkočiūnas.
R. Alutytė. Geometrically nonlinear beam cross-section optimization algorithm. Supervisor R. Karkauskas.
R. Alutytė. Geometrically nonlinear beam cross-section optimization algorithm. Supervisor R. Karkauskas.
2010
L. Kamblevičius. Optimization of truss mesh. Supervisor S. Kalanta.
N. Račkaitis. Triangle grid truss optimization using discrete mathematical programming. Supervisor S. Kalanta.
D. Spangevičiūtė. Influence of various factors for results of structural dynamic analysis. Supervisor J. Nagevičius.
T. Ulitinas. Optimization of truss height. Supervisor S. Kalanta.
N. Račkaitis. Triangle grid truss optimization using discrete mathematical programming. Supervisor S. Kalanta.
D. Spangevičiūtė. Influence of various factors for results of structural dynamic analysis. Supervisor J. Nagevičius.
T. Ulitinas. Optimization of truss height. Supervisor S. Kalanta.
2011
G. Blaževičius. An incremental-iterative method for shakedown analysis of bar structures. Supervisor J. Atkočiūnas.
S. Bolzan. Peculiarities of truss dynamic design. Supervisor J. Nagevičius.
G. Jarašūnaitė. Optimization of inelastic geometrically nonlinear beams under strength and rigidity constraints. Supervisor R. Karkauskas.
L. Katelnikova. Optimization of frames with truss. Supervisor S. Kalanta.
V. Kukenis. Strained deformed state analysis of perforated beams. Supervisor E. Jarmolajeva.
E. Kurpytė. Optimization of bar dome taking into account inelastic steel strains and maintenance requirements. Supervisor R. Karkauskas.
A. Paliokas. Strained deformed state analysis of trusses from circular tubes. Supervisor E. Jarmolajeva.
M. Juknys. Geometrically nonlinear optimization of bar frame under strength and stiffness requirements. Vadovas R. Karkauskas.
A. Akimcev. Optimization of geometrically nonlinear frames. Supervisor R. Karkauskas.
S. Bolzan. Peculiarities of truss dynamic design. Supervisor J. Nagevičius.
G. Jarašūnaitė. Optimization of inelastic geometrically nonlinear beams under strength and rigidity constraints. Supervisor R. Karkauskas.
L. Katelnikova. Optimization of frames with truss. Supervisor S. Kalanta.
V. Kukenis. Strained deformed state analysis of perforated beams. Supervisor E. Jarmolajeva.
E. Kurpytė. Optimization of bar dome taking into account inelastic steel strains and maintenance requirements. Supervisor R. Karkauskas.
A. Paliokas. Strained deformed state analysis of trusses from circular tubes. Supervisor E. Jarmolajeva.
M. Juknys. Geometrically nonlinear optimization of bar frame under strength and stiffness requirements. Vadovas R. Karkauskas.
A. Akimcev. Optimization of geometrically nonlinear frames. Supervisor R. Karkauskas.
2012
T. Gesevičius. Optimal shakedown design of elastoplastic arches by the gradient. Supervisor J. Atkočiūnas.
Š. Kisevičius. Optimization of steel bridge truss height and mass. Supervisor S. Kalanta.
O. Komar. Computer-aided design of concrete bridge beam. Supervisor E. Jarmolajeva.
L. Liepa. Geometrically nonlinear analysis of elastic-plastic frame. Supervisor R. Karkauskas.
A. Pelutytė. SSF analysis of arch experienced plastic deformations. Supervisor R. Karkauskas.
I. Rimkus. Optimization of bridge floor steel structure. Supervisor S. Kalanta.
D. Ruplėnas. Analysis of offshore structure, using shakedown theory. Supervisor J. Atkočiūnas.
A. Sungaila. Optimization of frames limit moments at shakedown under displacements and complementary conditions. Supervisor J. Atkočiūnas.
K. Varatinskytė. Analysis of frame structures using modern computer technologies. Supervisor M. Popov (V. Skarzauskas).
Š. Kisevičius. Optimization of steel bridge truss height and mass. Supervisor S. Kalanta.
O. Komar. Computer-aided design of concrete bridge beam. Supervisor E. Jarmolajeva.
L. Liepa. Geometrically nonlinear analysis of elastic-plastic frame. Supervisor R. Karkauskas.
A. Pelutytė. SSF analysis of arch experienced plastic deformations. Supervisor R. Karkauskas.
I. Rimkus. Optimization of bridge floor steel structure. Supervisor S. Kalanta.
D. Ruplėnas. Analysis of offshore structure, using shakedown theory. Supervisor J. Atkočiūnas.
A. Sungaila. Optimization of frames limit moments at shakedown under displacements and complementary conditions. Supervisor J. Atkočiūnas.
K. Varatinskytė. Analysis of frame structures using modern computer technologies. Supervisor M. Popov (V. Skarzauskas).
2013
A. Jokšas. Optimal shakedown Vierendeel truss design under stiffness constraints. Supervisor J. Atkočiūnas.
A. Gervytė. Optimization of elastic-plastic bar structure by computer analysis methods. Supervisor E. Jarmolajeva.
A. Grinis. Peculiarities of dynamic analysis of slender steel towers. Supervisor J. Nagevičius.
G. Platakis. Discrete optimization of steel bridge truss. Supervisor S. Kalanta.
A. Gervytė. Optimization of elastic-plastic bar structure by computer analysis methods. Supervisor E. Jarmolajeva.
A. Grinis. Peculiarities of dynamic analysis of slender steel towers. Supervisor J. Nagevičius.
G. Platakis. Discrete optimization of steel bridge truss. Supervisor S. Kalanta.
2014
D. Baltušis. Finite elements in problems of bar structural optimization. Supervisor S. Kalanta.
I. Selezenevaitė. Algorithm of inelastic metal structure cross-section parameters optimization. Supervisor R. Karkauskas.
P. Vasiliauskas. Optimization of steel round plate load using von Mises criterion. Supervisor E. Jarmolajeva.
V. Vasiliauskis. Optimization of intersecting beams under stiffness constraints and subjected by vertical loads. Supervisor R. Karkauskas.
I. Selezenevaitė. Algorithm of inelastic metal structure cross-section parameters optimization. Supervisor R. Karkauskas.
P. Vasiliauskas. Optimization of steel round plate load using von Mises criterion. Supervisor E. Jarmolajeva.
V. Vasiliauskis. Optimization of intersecting beams under stiffness constraints and subjected by vertical loads. Supervisor R. Karkauskas.
2015
G. Butkus. Analysis of strength conditions in optimization problems. Supervisor R. Karkauskas.
O. Chabarova. Optimization of elastic-plastic grid by computer analysis methods. Supervisor E. Jarmolajeva.
M. Ramanavičius. Analysis of temperature changes in structures. Supervisor L. Rimkus.
E. Ruočka. Improving of finite elements in discrete optimization problem for elastic frame structure. Supervisor T. Ulitinas.
O. Chabarova. Optimization of elastic-plastic grid by computer analysis methods. Supervisor E. Jarmolajeva.
M. Ramanavičius. Analysis of temperature changes in structures. Supervisor L. Rimkus.
E. Ruočka. Improving of finite elements in discrete optimization problem for elastic frame structure. Supervisor T. Ulitinas.
G. Lazauskas. Cross-sections optimization of advertisement stands, accounting strength and stiffness requirements. Supervisor R. Karkauskas.
2016
S. Puškoriūtė. Design of bar structures at elevated temperatures. Supervisor L. Rimkus.
University first cycle (undergraduate, Bachelor' s) studies | ||||
---|---|---|---|---|
Code | Name | Credits | ECTS credits | Department |
STKMB11642 | Applied Mathematics and Mechanics | 4 | 4 | F |
STKMB11642 | Applied Mathematics and Mechanics | 4 | 4 | H |
STKMB11642 | Applied Mathematics and Mechanics | 4 | 4 | I |
STKMB11501 | Applied Mechanics | 3 | 3 | F |
STKMB11723 | Bachelor Graduation Thesis 1 | 3 | 3 | F |
STKMB11723 | Bachelor Graduation Thesis 1 | 3 | 3 | H |
STKMB11723 | Bachelor Graduation Thesis 1 | 3 | 3 | I |
STKMB11869 | Bachelor Graduation Thesis 2 | 6 | 6 | F |
STKMB11869 | Bachelor Graduation Thesis 2 | 6 | 6 | H |
STKMB11869 | Bachelor Graduation Thesis 2 | 6 | 6 | I |
STKMB11830 | Bachelor Graduation Thesis 3 | 7 | 7 | F |
STKMB11830 | Bachelor Graduation Thesis 3 | 7 | 7 | H |
STKMB11830 | Bachelor Graduation Thesis 3 | 7 | 7 | I |
STKMB11738 | Dynamics and Stability of Buildings | 3 | 3 | F |
STKMB11738 | Dynamics and Stability of Buildings | 3 | 3 | H |
STKMB11738 | Dynamics and Stability of Buildings | 3 | 3 | I |
STKMB11686 | Fundamentals of Elasticity Theory | 3 | 3 | F |
STKMB11686 | Fundamentals of Elasticity Theory | 3 | 3 | H |
STKMB11686 | Fundamentals of Elasticity Theory | 3 | 3 | I |
STKMB11254 | Fundamentals of Structural Mechanics | 3 | 3 | F |
STKMB11782 | Fundamentals of Structural Optimization | 5 | 5 | F |
STKMB11782 | Fundamentals of Structural Optimization | 5 | 5 | H |
STKMB11782 | Fundamentals of Structural Optimization | 5 | 5 | I |
STKMB11537 | Structural Mechanics | 4 | 4 | F |
STKMB11537 | Structural Mechanics | 4 | 4 | H |
STKMB11537 | Structural Mechanics | 4 | 4 | I |
STKMB11474 | Structural Mechanics | 4 | 4 | F |
STKMB11575 | Structural Mechanics | 4 | 4 | F |
STKMB11409 | Structural Mechanics | 5 | 5 | F |
STKMB11558 | Structural Mechanics | 4 | 4 | F |
STKMB11456 | Structural Mechanics | 4 | 4 | F |
STKMB11456 | Structural Mechanics | 4 | 4 | H |
STKMB11456 | Structural Mechanics | 4 | 4 | I |
STKMB11576 | Structural mechanics | 3 | 3 | F |
STKMB11436 | Structural Mechanics 1 | 5 | 5 | F |
STKMB11436 | Structural Mechanics 1 | 5 | 5 | I |
STKMB11534 | Structural Mechanics 2 | 6 | 6 | F |
STKMB11534 | Structural Mechanics 2 | 6 | 6 | I |
University second cycle (graduate, Master' s) studies | ||||
---|---|---|---|---|
Code | Name | Credits | ECTS credits | Department |
STKMM11307 | Analysis and Optimal Shakedown Design of Structures | 8 | 8 | F |
STKMM11210 | Design of Structures for Variable Temperature Gradient | 8 | 8 | F |
STKMM11208 | Design of Structures on Deformable Basement | 3 | 3 | F |
STKMM11208 | Design of Structures on Deformable Basement | 3 | 3 | I |
STKMM02091 | Design of Structures Under Fire Conditions | 4,5 | 4,5 | D |
STKMM02091 | Design of Structures Under Fire Conditions | 4,5 | 4,5 | T |
STKMM11411 | Master Graduation Thesis | 30 | 30 | F |
STKMM11102 | Master Graduation Thesis 1 | 3 | 3 | F |
STKMM11205 | Master Graduation Thesis 2 | 3 | 3 | F |
STKMM11309 | Master Graduation Thesis 3 | 3 | 3 | F |
STKMM11204 | Mechanics of Continual Structures | 6 | 6 | F |
STKMM11101 | Mechanics of Inelastic Structures | 8 | 8 | F |
STKMM11206 | Optimization of Inelastic Bar Structures | 7 | 7 | F |
STKMM11119 | Theory and Methods of Optimization | 6 | 6 | F |
STKMM11119 | Theory and Methods of Optimization | 6 | 6 | I |
STKMM11103 | Theory and Methods of Optimization | 5 | 5 | F |
STKMM11122 | Theory and Methods of Optimization | 7 | 7 | F |
STKMM13221 | Theory and methods of optimization in architectural engineering | 6 | 6 | F |
STKMM11112 | Theory and Methods of Optimization in Technics | 8 | 8 | F |
STKMM11117 | Theory and Methods of Optimization in Technics | 7 | 7 | F |
STKMM11124 | Theory and Methods of Optimization in Technics | 6 | 6 | F |
STKMM11123 | Theory and Methods of Structural Optimization | 5 | 5 | F |
STKMM11123 | Theory and Methods of Structural Optimization | 5 | 5 | I |
Manuals
1. A. Čyras. Structural Mechanics. Theory and Algorithms. Moscow: Strojizdat, 1989. 225 p. (in Russian).
2. A. Čyras. Structural Mechanics. Vilnius: Mokslas, 1990. 448 p. ( in Lithuanian).
3. R. Karkauskas, A. Krutinis, J. Atkočiūnas, S. Kalanta, J.Nagevičius. Structural Mechanics. Programs and Solution of Problems by PC.Moscow:Strojizdat,1990.360 p. (in Russian).
4. R. Karkauskas, A. Krutinis, J. Atkočiūnas, S. Kalanta, J.Nagevičius. Solution of Structural Mechanics Problems by Computers. Vilnius: Science and Encyclopaedic Publishing House, 1995. 264p. (in Lithuanian).
5. J. Atkočiūnas, J. Nagevičius. Fundamentals of Elasticity Theory. Manual. Vilnius: Technika, 2004, 528 p. (in Lithuanian). 6.S. Kalanta. Fundamentals of applied optimization. Manual. Vilnius: Technika, 2007. 480 p. (In Lithuanian).
7.J. Atkočiūnas, A. E. Čižas. Mechanics of inelastic structures. Textbook. Vilnius: Technika, 2009. 268 p. ISBN 978-9955-28-492-5. (in Lithuanian).
8. J. Atkočiūnas, R. Karkauskas. Optimization of elastic-plastic bar structures. A common textbook. Vilnius: Technika, 2010. 376 p. Recomended by Lithuanian Education and Science ministry High schools quality assesment comission on 2010 05 28 No. 10-05. (in Lithuanian).
9. J. Atkočiūnas. Optimal shakedown design of elastic-plastic structures : manual / J. Atkočiūnas ; Vilniaus Gedimino technikos universitetas. Vilnius : Technika, 2011. 300 p. ISBN 9786094570629.
2. A. Čyras. Structural Mechanics. Vilnius: Mokslas, 1990. 448 p. ( in Lithuanian).
3. R. Karkauskas, A. Krutinis, J. Atkočiūnas, S. Kalanta, J.Nagevičius. Structural Mechanics. Programs and Solution of Problems by PC.Moscow:Strojizdat,1990.360 p. (in Russian).
4. R. Karkauskas, A. Krutinis, J. Atkočiūnas, S. Kalanta, J.Nagevičius. Solution of Structural Mechanics Problems by Computers. Vilnius: Science and Encyclopaedic Publishing House, 1995. 264p. (in Lithuanian).
5. J. Atkočiūnas, J. Nagevičius. Fundamentals of Elasticity Theory. Manual. Vilnius: Technika, 2004, 528 p. (in Lithuanian). 6.S. Kalanta. Fundamentals of applied optimization. Manual. Vilnius: Technika, 2007. 480 p. (In Lithuanian).
7.J. Atkočiūnas, A. E. Čižas. Mechanics of inelastic structures. Textbook. Vilnius: Technika, 2009. 268 p. ISBN 978-9955-28-492-5. (in Lithuanian).
8. J. Atkočiūnas, R. Karkauskas. Optimization of elastic-plastic bar structures. A common textbook. Vilnius: Technika, 2010. 376 p. Recomended by Lithuanian Education and Science ministry High schools quality assesment comission on 2010 05 28 No. 10-05. (in Lithuanian).
9. J. Atkočiūnas. Optimal shakedown design of elastic-plastic structures : manual / J. Atkočiūnas ; Vilniaus Gedimino technikos universitetas. Vilnius : Technika, 2011. 300 p. ISBN 9786094570629.
J. Atkočiūnas, G. Blaževičius. Integral structural mechanics. First part. Design of trusses: manual. Vilnius: Technika 2015. 264 p.: iliustr. ISBN 978-609-457-706-2. http://doi.org/10.3846/1516-S. (in Lithuanian).
Training books
1.J. Atkočiūnas, J. Nagevičius. Fundamentals of elasticity theory. A training book. Vilnius, Technika, 2000, 274 p. (in Lithuanian).
2.A. Norkus, R. Fliotovienė. Equilibrium method in the analysis of structures. A training book. Vilnius, Technika, 2000, 60 p.
3.L. Rimkus, V. Skaržauskas. Structural mechanics of plate bar systems. Guide of problems solution. Vilnius, Technika, 2000, 170 p. (in Lithuanian).
4.L. Rimkus, V. Skaržauskas. Structural mechanics of plate bar systems. Guide of problems solution. 2nd edition. Vilnius, Technika, 2001, 156 p. (in Lithuanian).
5.A. Krutinis. Structural mechanics. Design theory and methods of structures on elastic foundation (training book). Vilnius, Technika, 2001, 168 p. (in Lithuanian).
6.L. Rimkus, V. Skaržauskas. Structural mechanics of plate bar systems. Guide of problems solution. 3rd edition. Vilnius, Technika, 2002. 165 p. (in Lithuanian).
7.J. Nagevičius, R. Karkauskas, A. Norkus. Ilustrated material of lectures of modulus „Structural mechanics 1“ [paperless issue]: a training book. Vilnius: Technika, 2006. 435 p. (in Lithuanian). http://dspace.vgtu.lt/handle/1/141
8.A. Krutinis. Design theory and methods of structures on elastic basement: a training book. Second edition. Vilnius : Technika, 2007. 161 p. ISBN 978-9955-28-175-7. (in Lithuanian).
9.J. Nagevičius. Module „Structural mechanics“ (module code STKMB05036): a training book [paperless issue]. Vilnius, 2010. (in Lithuanian).
10. J. Nagevičius. Guide of structural mechanics problems solution: a training book / Juozas Nagevičius; Vilniaus Gedimino technikos universitetas. Vilnius : Technika, 2012. 247 p. :. ISBN 978-609-457-214-2. (in Lithuanian).
11 L. Rimkus; J. Nagevičius; R. Karkauskas. Structural mechanics: handbook for students : study book / [paperless issue] / Liudas Rimkus, Romanas Karkauskas, Juozas Nagevičius. Vilnius : Technika, 2012. 189 p. ISBN 9786094572258. http://dspace.vgtu.lt/handle/1/1443
12. V. Skaržauskas; S. Valentinavičius. Basics of structural mechanics: [paperless issue] a training book / Valentinas Skaržauskas, S.Valentinavičius. Vilnius : Technika, 2012. 316 p. ISBN 9786094571732. (in Lithuanian). http://dspace.vgtu.lt/handle/1/1357
13. J. Atkočiūnas. Fundamentals of Elasticity and Plasticity Theory: lectures for students of civil engineering. D. 1. / J. Atkočiūnas ; Vilniaus inžinerinis statybos institutas. Vilnius : LTSR ASVMM, 1977. 35 p. (in Lithuanian).
14. J. Atkočiūnas, V. Dulmanas. Fundamentals of Elasticity and Plasticity Theory: lectures for students of civil engineering D. 2 / J. Atkočiūnas, V. Dulmanas ; Vilniaus inžinerinis statybos institutas. Vilnius : LTSR ASVMM, 1978. 44 p. (in Lithuanian).
15. J. Atkočiūnas, V. Dulmanas. Fundamentals of Applied Elasticity and Plasticity Theory: lectures for students of civil engineering / J. Atkočiūnas, V. Dulmanas ; Vilniaus inžinerinis statybos institutas. Vilnius : LTSR ASVMM, 1979. 65 p. (in Lithuanian).
16. R. Karkauskas, J. Atkočiūnas, N. Žukas. Design of Elastic Bendable Plates: methodics and programme for PC / R. Karkauskas, J. Atkočiūnas, N. Žukas ; Vilniaus inžinerinis statybos institutas. Vilnius : [s. n.], 1984. 45 p. (in Lithuanian).
17. J. Atkočiūnas, V. Dulmanas., J. Nagevičius, V. Skaržauskas. Elasticity Theory: methodics of control works for students of civil engineering / J. Atkočiūnas, V. Dulmanas, J. Nagevičius, V. Skaržauskas ; Vilniaus inžinerinis statybos institutas. Vilnius : [s. n.], 1990. 120 p. (in Lithuanian).
2.A. Norkus, R. Fliotovienė. Equilibrium method in the analysis of structures. A training book. Vilnius, Technika, 2000, 60 p.
3.L. Rimkus, V. Skaržauskas. Structural mechanics of plate bar systems. Guide of problems solution. Vilnius, Technika, 2000, 170 p. (in Lithuanian).
4.L. Rimkus, V. Skaržauskas. Structural mechanics of plate bar systems. Guide of problems solution. 2nd edition. Vilnius, Technika, 2001, 156 p. (in Lithuanian).
5.A. Krutinis. Structural mechanics. Design theory and methods of structures on elastic foundation (training book). Vilnius, Technika, 2001, 168 p. (in Lithuanian).
6.L. Rimkus, V. Skaržauskas. Structural mechanics of plate bar systems. Guide of problems solution. 3rd edition. Vilnius, Technika, 2002. 165 p. (in Lithuanian).
7.J. Nagevičius, R. Karkauskas, A. Norkus. Ilustrated material of lectures of modulus „Structural mechanics 1“ [paperless issue]: a training book. Vilnius: Technika, 2006. 435 p. (in Lithuanian). http://dspace.vgtu.lt/handle/1/141
8.A. Krutinis. Design theory and methods of structures on elastic basement: a training book. Second edition. Vilnius : Technika, 2007. 161 p. ISBN 978-9955-28-175-7. (in Lithuanian).
9.J. Nagevičius. Module „Structural mechanics“ (module code STKMB05036): a training book [paperless issue]. Vilnius, 2010. (in Lithuanian).
10. J. Nagevičius. Guide of structural mechanics problems solution: a training book / Juozas Nagevičius; Vilniaus Gedimino technikos universitetas. Vilnius : Technika, 2012. 247 p. :. ISBN 978-609-457-214-2. (in Lithuanian).
11 L. Rimkus; J. Nagevičius; R. Karkauskas. Structural mechanics: handbook for students : study book / [paperless issue] / Liudas Rimkus, Romanas Karkauskas, Juozas Nagevičius. Vilnius : Technika, 2012. 189 p. ISBN 9786094572258. http://dspace.vgtu.lt/handle/1/1443
12. V. Skaržauskas; S. Valentinavičius. Basics of structural mechanics: [paperless issue] a training book / Valentinas Skaržauskas, S.Valentinavičius. Vilnius : Technika, 2012. 316 p. ISBN 9786094571732. (in Lithuanian). http://dspace.vgtu.lt/handle/1/1357
13. J. Atkočiūnas. Fundamentals of Elasticity and Plasticity Theory: lectures for students of civil engineering. D. 1. / J. Atkočiūnas ; Vilniaus inžinerinis statybos institutas. Vilnius : LTSR ASVMM, 1977. 35 p. (in Lithuanian).
14. J. Atkočiūnas, V. Dulmanas. Fundamentals of Elasticity and Plasticity Theory: lectures for students of civil engineering D. 2 / J. Atkočiūnas, V. Dulmanas ; Vilniaus inžinerinis statybos institutas. Vilnius : LTSR ASVMM, 1978. 44 p. (in Lithuanian).
15. J. Atkočiūnas, V. Dulmanas. Fundamentals of Applied Elasticity and Plasticity Theory: lectures for students of civil engineering / J. Atkočiūnas, V. Dulmanas ; Vilniaus inžinerinis statybos institutas. Vilnius : LTSR ASVMM, 1979. 65 p. (in Lithuanian).
16. R. Karkauskas, J. Atkočiūnas, N. Žukas. Design of Elastic Bendable Plates: methodics and programme for PC / R. Karkauskas, J. Atkočiūnas, N. Žukas ; Vilniaus inžinerinis statybos institutas. Vilnius : [s. n.], 1984. 45 p. (in Lithuanian).
17. J. Atkočiūnas, V. Dulmanas., J. Nagevičius, V. Skaržauskas. Elasticity Theory: methodics of control works for students of civil engineering / J. Atkočiūnas, V. Dulmanas, J. Nagevičius, V. Skaržauskas ; Vilniaus inžinerinis statybos institutas. Vilnius : [s. n.], 1990. 120 p. (in Lithuanian).
-
- Page administrators:
- Loreta Kanapeckienė
- Sotera Babrauskytė
- Karolina Kardokaitė