Professional Practice
The student must complete his / her practical training tripartite agreement by logging in to mano.vilniustech.lt. If the internship agreement is not filled in on the mano.vilniustech.lt page, the administrator of the department will not be able to register it and the internship will not be credited. For an internship assignment, contact your internship supervisor lecturer.
When the tripartite practical training agreement is filled on mano.vilniustech.lt, the following steps must be entered:
When the tripartite practical training agreement is filled on mano.vilniustech.lt, the following steps must be entered:
- The aim of the internship: to deepen production-practical skills by directly participating in the company's production processes, to evaluate theoretical knowledge acquired by studying engineering disciplines and apply them in production, to understand the essence of design and technological work, to develop and produce modern equipment and to collect material for final bachelor thesis.
- The task of the internship: during the professional internship the student carries out the program according to the individual task created by the supervisor-lecturer
Payment for the completed internships will take place in 2021. October month. at the end of the time appointed by the teacher-practice manager. You need to have a report and feedback from the internship manager in the company with an assessment.
We work remotely for QUARANTINE. Please send your practice tripartite agreement with the company’s signature and stamp by email. e-mail to the Department of Mechanical and Materials Engineering crypt:PGEgaHJlZj0ibWFpbHRvOm1lbWlAdmd0dS5sdCI+bWVtaUB2aWxuaXVzdGVjaC5sdDwvYT4=:xx and your supervisor (you will find in the agreement).
At the end of the QUARANTINE, the student must print 3 copies. The student must complete Practical training agreement at mano.vilniustech.lt and collect signatures and stamps:
We work remotely for QUARANTINE. Please send your practice tripartite agreement with the company’s signature and stamp by email. e-mail to the Department of Mechanical and Materials Engineering crypt:PGEgaHJlZj0ibWFpbHRvOm1lbWlAdmd0dS5sdCI+bWVtaUB2aWxuaXVzdGVjaC5sdDwvYT4=:xx and your supervisor (you will find in the agreement).
At the end of the QUARANTINE, the student must print 3 copies. The student must complete Practical training agreement at mano.vilniustech.lt and collect signatures and stamps:
- Signed by the student,
- Signed by the internship supervisor,
- Head of the company (necessarily with the company's round stamp),
- VILNIUS TECH MF Vice Dean, Dean's Office Administrator affixes a round VILNIUS TECH MF stamp;
- The agreement with signatures must be submitted to the department for registration (VILNIUS TECH MF Department of Mechanical and Materials Engineering, Ina Tetsman (P1 227))
Administrator of the Department, responsible for the registration of student practical training contracts, Irena Survilaitė-Jakštienė, tel. 2744733
Final work
REQUIREMENTS FOR BACHELOR‘S DEGREE FINAL WORK
Information for Mechanical Engineering students (Machine Design specialization (MPfuc, MPfu))
1. Objectives of Final Work. Simple machines, mechanisms and products based on one or several interacting mechanical, mechatronic drives can be designed or modernized in Bachelor's degree Final Work (BD). One or more structural components of sophisticated machinery or mechatronic system may be also designed or modernized.
2. Bachelor thesis consists of text part (explanatory note) and graphical part (drawings).
3. Structure of explanatory note:
3.1. Objectives of Final Work (https://vilniustech.lt/studies/final-work-and-thesis/54017?lang=2),
3.2. Annotation of Final Work (https://vilniustech.lt/studies/final-work-and-thesis/54017?lang=2),
3.3. Declaration of authorship (https://vilniustech.lt/studies/final-work-and-thesis/54017?lang=2),
3.4. Introduction,
3.5. Analysis of similar designs. Justification of decisions chosen (pages from 6 to 12),
3.6. Calculations necessary to ensure proper work and stability of the object designed, description of the design and operating principle of the object designed (pages from 25 to 35),
3.7. Design of manufacturing technological process for selected component of the object (pages from 8 to 12)
3.8. Composing of the work safety and environmental protection requirements for object designed (pages from 4 to 5),
3.9. Production organization issues (pages from 3 to 4, if necessary),
3.10. Economical estimation of the project with analysis (pages from 2 to 3),
3.11. Conclusions and recommendations,
3.12. List of references.
4. The graphical part must consist of no less than four A1 format drawings
4.1. Drawings of the following types can be presented in graphical part of the Final Work:
In addition to before mentioned, other drawings concerning organization of production, work safety or environmental protection can be presented respectively (from 0.5 to 1 A1 sheet).
Information for Mechanical Engineering students (Machine Design specialization (MPfuc, MPfu))
1. Objectives of Final Work. Simple machines, mechanisms and products based on one or several interacting mechanical, mechatronic drives can be designed or modernized in Bachelor's degree Final Work (BD). One or more structural components of sophisticated machinery or mechatronic system may be also designed or modernized.
2. Bachelor thesis consists of text part (explanatory note) and graphical part (drawings).
3. Structure of explanatory note:
3.1. Objectives of Final Work (https://vilniustech.lt/studies/final-work-and-thesis/54017?lang=2),
3.2. Annotation of Final Work (https://vilniustech.lt/studies/final-work-and-thesis/54017?lang=2),
3.3. Declaration of authorship (https://vilniustech.lt/studies/final-work-and-thesis/54017?lang=2),
3.4. Introduction,
3.5. Analysis of similar designs. Justification of decisions chosen (pages from 6 to 12),
3.6. Calculations necessary to ensure proper work and stability of the object designed, description of the design and operating principle of the object designed (pages from 25 to 35),
3.7. Design of manufacturing technological process for selected component of the object (pages from 8 to 12)
3.8. Composing of the work safety and environmental protection requirements for object designed (pages from 4 to 5),
3.9. Production organization issues (pages from 3 to 4, if necessary),
3.10. Economical estimation of the project with analysis (pages from 2 to 3),
3.11. Conclusions and recommendations,
3.12. List of references.
4. The graphical part must consist of no less than four A1 format drawings
4.1. Drawings of the following types can be presented in graphical part of the Final Work:
- Analysis of design variants (from 0,5 to 1 A1 sheet),
- General view drawing of the system (from 1 to 2 A1 sheets),
- Kinematic, hydraulic, pneumatic or electrical diagrams (from 0,5 to 1 A1 sheet),
- Assembly drawings of the assembly or subassemblies (from 1 to 2 A1 sheets),
- Work drawings of selected parts of assembly or subassemblies (from 0,5 to 1 A1 sheet),
- Technological sketches of part machining operation or metrological (if needed) sketches (from 0.5 to 1 A1 sheet),
- Economical rates (0.5 of A1 sheet).
In addition to before mentioned, other drawings concerning organization of production, work safety or environmental protection can be presented respectively (from 0.5 to 1 A1 sheet).
Documents and instructions
Topic confirmation request
-
- Page administrators:
- Andrius Gedvila
- Mantas Makulavičius
- Urtė Bulkovaitė
- Karolina Kardokaitė
