Professor of ETH Zurich University – about “Trauma Biomechanics and rehabilitation technologies”

March 16, 2016
Information about lectures
 
40 hours course on “Trauma Biomechanics and rehabilitation technologies”
 
Target auditorium – I, II and III study cycle students from biomechanics, mechanical engineering and transport engineering.
Lectures – fundamental theory, concepts, knowledge
Exercise – focus on practical aspects of knowledge application
Seminar – exchange of information and discussions about topics of interests
 
Schedule of the lectures
Day
Topic
Type
Hours
Date and time
Room
Basic knowledge
1
Introduction / Injury models and failure of biological tissue
Lecture
2
2016.03.14
1020-1155
MR-II,
2-107
Analysing (sports, traffic) accidents
Exercise
2
2016.03.14
1210-1345
MR-II,
2-107
2
Head injury
Lecture
2
2016.03.15
1020-1155
MR-II,
2-206
Sports helmets
Exercise
2
2016.03.15
1210-1345
MR-II,
2-206
3
Injury to the upper and lower extremities
Lecture
2
2016.03.16
1020-1155
MR-II,
2-107
Experiments in trauma biomechanics
Exercise
2
2016.03.16
1210-1345
MR-I,
1-109
4
 
Excursion to Rehab Hospital
 
 
2016.03.17
800-1200
Santariškių klinikos
Principles and applications in rehabilitation (Discussion of today’s visit)
Exercise
4
2016.03.17
1620-1945
MR-II,
2-107
5
Trauma to the spine and thorax
Lecture
2
2016.03.18
1210-1345
MR-II,
2-107
Injury prevention in sports
Exercise
2
2016.03.18
1430-1605
MR-II,
2-107
Special topics in trauma biomechanics
6
Computer simulations
Lecture
2
2016.03.21
1020-1155
MR-II,
2-107
Student project
Exercise
2
2016.03.21
1210-1345
MR-II,
2-107
7
Occupant protection
Lecture
2
2016.03.22
1020-1155
MR-IV,
1-213
Student project
Exercise
2
2016.03.22
1210-1345
MR-IV,
1-213
8
Pedestrian Impact
Lecture
2
2016.03.23
1020-1155
MR-II,
2-214
Student project
Exercise
2
2016.03.23
1210-1345
MR-II,
2-206
9
Exam
Lecture
1
2016.03.24
830-915
MR-II,
2-107
Student competition
Exercise
3
2016.03.24
920-1155
MR-II,
2-107
10
Trauma in children and elderly
Lecture
2
2016.03.25
830-1005
MR-II,
2-107
Summary /Wrap-up and final discussion
Lecture
2
2016.03.25
1020-1155
MR-II,
2-107
 
 
Total:
40
 
 
 

 

 
Trauma biomechanics and rehabilitation technologies
 
According to the statistics in Lithuania, the number of registered traffic accidents decreased almost 6.5 times (9.8 in 1980 and 1.5 in 2013), however the number of injured remained almost the same – for a 100 thousand people there was 137.6 injured in 1980 and 134.6 in 2013 (www.lakd.lt). Injuries, related to traffic accidents can be of different outcomes – from mild to severe, when person becomes disabled permanently. Active person can sustain injuries during sport activities or in work placement.  Trauma biomechanics is important scientific field, which explores biomechanics of various injuries, i.e. what are trauma mechanisms and causes. This knowledge is important for design of safe transportation means, developing and designing safe training equipment and rehabilitation devices, assistive technologies for disabled. Research in trauma biomechanics requires broad knowledge and understanding in biomechanics, mechanics and application of different technologies (computer simulation and experiments). Students will understand importance of various technologies and approaches, will obtain better understanding of general biomechanics principles and their application.
 
Dr. Kai-Uwe Schmitt is professor of Zurich University and Swiss Federal Institute of Technology, researcher at Institute of Biomedical Engineering, council member and secretary of the International Research Council on Biomechanics of Injury (IRCOBI), member of advisory board on traffic safety at Swiss Federal Road Office, partner/board member and senior researcher at Working Group on Accident Mechanics (AGU Zurich).

Related news

€75,000 Funding Opportunity for Women-Led Deep Tech Startups
€75,000 Funding Opportunity for Women-Led Deep Tech Startups
Women-led deep tech startups are invited to apply for the European Union-funded "Women TechEU 2" program. This initiative aims to strengthen women's entrepreneurship in the technology sector, foster innovation, and help promising startups prepare for further growth and attract additional funding. Selected participants will receive a €75,000 grant and the opportunity to take part in a six-month tailored business development program. During this period, startups will be provided with mentoring, consulting, and training services designed to accelerate business growth and enhance competitiveness in the international market. The total budget for the "Women TechEU 2" program is €12 million. The plan is to fund 160 women-led startups from across Europe. Application Process The application process for the new call consists of two stages. First, applicants must submit an application for the Eligibility Strand to verify whether the startup meets the program's requirements. Applicants deemed eligible will then be invited to submit a Full Proposal. The eligibility assessment stage began on June 1, 2026. Applications are accepted on a rolling basis, with evaluations conducted weekly – the weekly submission deadline is every Tuesday by 18:00 (17:00 CEST). The first deadline is June 30, 2026, and the final deadline is July 13, 2027. Applicants will receive their eligibility assessment results no later than one week after the respective submission deadline. Who Can Apply? The program is designed for women-led, early-stage deep tech startups. To be eligible for funding, the following conditions must be met: At least one founder or co-founder of the startup is a woman; A woman holds a top-level executive position (CEO, CTO, or equivalent); Women hold at least 25% of the company's shares. Program Objectives The "Women TechEU 2" program aims to: Promote women's entrepreneurship in the deep tech sector; Help innovative startups scale up and attract additional European Union funding; Strengthen European innovation ecosystems; Support the development and commercialization of new technologies. Potential applicants are encouraged to review the application guidelines in advance and avoid waiting until the final deadline to submit their proposals. More information can be found here: https://womentecheurope.eu/active-calls/
More
New doctoral dissertation
New doctoral dissertation
VILNIUS TECH Library invites you to follow the published new dissertations. The dissertation „Performance investigation of a hybrid car engine fuelled with gasoline and gaseous mixtures“ („Benziną ir dujų mišinius naudojančio hibridinio automobilio variklio efektyvumo tyrimas“) prepared at VILNIUS TECH by Tadas Vipartas. The dissertation was prepared in 2021–2026. Scientific consultant – Prof. Dr Alfredas Rimkus. The dissertation was defended at the public meeting of the Dissertation Defence Council of the Scientific Field of Transport Engineering in the Aula Doctoralis Meeting Hall of Vilnius Gediminas Technical University at 9 a.m. on 12 June 2026. This dissertation investigates the use of alternative fuels (natural gas and hydrogen) to increase the efficiency of a spark-ignition engine. The impact of different fuels and engine control algorithms on the combustion process and on energy and ecological indicators was determined and evaluated by analysing the emerging technological constraints within the context of a power-split (series-parallel) hybrid powertrain. The dissertation presents a review of scientific literature, analysing the directions for internal combustion engine improvement, the properties of gaseous fuels and the challenges of their application, along with the operating principles of automotive hybrid powertrains. Bench tests were conducted to investigate the effect of late intake valve closing timing on an engine operating on natural gas, and the influence of hydrogen additives on the combustion process and knock control. The numerical analysis of the engine’s combustion process was performed using AVL BOOST™ software, while the energy and ecological indicators of the hybrid vehicle were evaluated through experimental research and numerical simulation in the AVL CRUISE™ software. The following main results were obtained in the dissertation: retarding the intake valve closing timing increased the brake thermal efficiency and NOx emissions while reducing carbon dioxide emissions when the engine operates on natural gas. It was determined that a hydrogen additive in the fuel improves the engine’s energy indicators, but increases nitrogen oxides emissions and the risk of engine knock. Engine knock is effectively managed by retarding the ignition advance angle. Numerical simulation results confirmed that these trends persist during the Worldwide Harmonized Light-duty Vehicles Test Cycle: the use of hydrogen reduces fuel consumption and carbon dioxide emissions, but increases nitrogen oxides emissions. The dissertation results revealed the potential of these technologies and strategies for their application. The obtained data can be applied in the development and selection of advanced engine control algorithms and in the formulation of technologically sound environmental standards. Nine scientific articles have been published on the topic of the dissertation: six in scientific journals indexed in the Clarivate Analytics Web of Science database with an impact factor, one in a scientific journal indexed in the Clarivate Analytics Web of Science database without an impact factor, one in conference proceedings indexed in the Clarivate Analytics Web of Science Conference Proceedings Citation Index, and one in peer-reviewed conference proceedings not indexed in international databases. The research results were presented at three scientific conferences in Lithuania and Poland. Doctoral dissertation readers can search via VILNIUS TECH Virtual Library.
More