Vilnius from the Californian Professors’ Point of View

July 31, 2023

"VILNIUS TECH – CAL POLY 2023" International Engineering Summer School is currently in full swing at the university. Students from California State Polytechnic University (CalPoly) and Vilnius Gediminas Technical University (VILNIUS TECH) are engaged in intensive studies focused on architectural engineering subjects. The lectures and practical sessions are delivered by professors Edmond Saliklis and Peter Laursen from Cal Poly. We had a chat with the professors about the Summer School and their experiences in Vilnius so far.  

How did you feel upon coming to Vilnius and finding that the world has their eyes on Vilnius because of the NATO Summit? Also, for some of the American students, it was their first trip abroad, at least to Europe. So how did the rhythm changed from America to Vilnius, Europe?   

P. L. I have been here before, so it was like coming back home again. It was really exciting. And, you know, everything is fairly slow in the summer, so it's nice. Also, the students are coming here too, and some of them, as you said, have never been abroad before, so it's very exciting for them, and everything is new. We received a good introduction and then, you know, school started, and it was pretty busy. The school itself looks a lot like what we do in California, it's fast-paced. Our students recognized that way of teaching, whereas the Lithuanian students and the Ukrainian students were probably surprised that things were moving really fast. 

E. S. I guess I'll add about the NATO Summit experience. I felt very proud of the moment. I was proud of the President Joe Biden's speech. I thought it was a good speech because he touched important moments in Lithuanian history, such as the tragedy of peaceful people being killed by soviet tanks while they stood for freedom, including a VILNIUS TECH student. Then he moved through the topic of independence in 20 minutes. The Summit was a moment for Vilnius to shine around the entire world, which was great. I think we did well.   

Speaking of American students, we told them that they are representatives not only of the CalPoly but also of the United States in some regards, and I think they're taking that seriously. They are performing well. But they're also having fun, they're connected to the social life a little bit in the evenings. We work hard, so it's not a vacation. And we marketed it that way so that the students would be psychologically prepared. Even then, I think they were still a little shocked at the pace, but it's good. 

I would like to ask about the dynamics within the group. How do Lithuanian and Ukrainian students come together with Americans? Do they collaborate effectively despite the different cultural backgrounds between the United States and Europe?  

P. L. At the beginning, it seemed like those two worlds were somewhat separate in terms of how we approached teaching and what happens in the classroom. The Lithuanian and Ukrainian students were initially quiet while our American students were louder. However, I believe they are starting to blend together now, both sides are making efforts to connect with each other. Especially during the recent trip to the Baltic seaside, there was an opportunity for them to actually talk and interact. In class, things happen quickly, leaving little time for socializing. There's homework and other tasks throughout the week. However, during the trips, I see them getting to know each other better, both among the VILNIUS TECH and Cal Poly students, but also within the Cal Poly student group – many of them didn't know each other well before coming here, so this experience benefits them.  

E. S. I think the Lithuanian and Ukrainian students are typically very, very quiet. As the founder of this program since 2013, I have observed that Vilnius students tend to look around and try not to be noticed when they don't understand something. But if Cal Poly students don't understand something, they immediately ask for help. One reason for this difference is that Cal Poly students pay a substantial tuition fee, even though we are a public institution. Personally, I don't see this as a negative thing – they value their education and never miss a class, not even five minutes of it, because they are investing in it. Peter and I approach our role as educators like Broadway actors. The audience is out there, and the ticket is expensive. We have to be ready and fully prepared from day one. I believe this is a significant difference. I would love for your faculty to watch our teaching. Part of our mission here, which includes having Lithuanian students, is to build a bridge with your institution. 

Speaking about architecture and civil engineering, you've been, as you mentioned, to Vilnius many times. Vilnius is growing rapidly, with new buildings emerging every day. We have our traditions and heritage, but we also embrace a modern approach to architecture. How do you view it from a professional standpoint, the growth of the city?  

P. L. Looking at the physical surroundings, every time I come here, I can definitely see changes. New buildings have been constructed, and old buildings have been refurbished. There is a strong push to renovate everything in Vilnius. I believe it's a positive development as the buildings are being brought up to modern standards. It's very quaint and enjoyable to be a citizen here and walk everywhere. That's one of my favorite things to do. 

E. S. My perspective is a little different because I am Lithuanian, and I tend to view things somewhat skeptically, to some extent. Obviously, progress needs to happen. Obviously, we need glass towers with office buildings, there's no question about it. However, nobody will come to Vilnius to visit a glass tower, right? People come to visit the old town and even the old cinema theatre Lietuva. The fact that this building was destroyed, which was a cool modernist building, as far as I'm concerned, you know, I think you lose something when you do that. Of course, I can't say whether everything should be preserved or not, since I'm still an outsider – it's for you to decide.  

The worst example for me is the Sports Palace, which happens to be my favorite building. This building is extremely important. Anybody around the world who is an expert on long span structures recognizes that this is a landmark structure, a historical structure of worldwide importance. However, it's a structure built during Soviet occupation and it's built on a Jewish cemetery, so you have all this complexity which is political. It's not architectural history at all. But it’s the legacy of Antanas Panavas who worked on it. I am studying his work. He was imprisoned by soviets during the first occupation and then deported to Siberia at the beginning of the second occupation (together with his parents). Seeing that building every year breaks my heart, and it seems to deteriorate further each year. If somebody says they're going to tear it down, I will go and literally chain myself to the building. 

There are no plans to demolish this building. Furthermore, regarding the historical Jewish cemetery, we are actively and closely working with our esteemed Jewish community on this matter. Speaking of historical sites, there are numerous conversion projects happening in Vilnius. Do you believe that such conversions are also a way of preserving them by breathing new life into these buildings? 

P. L. I agree, buildings should be used, I mean, they're not just museum pieces. Therefore, if their context can be preserved and they can be put to important and useful purposes, I think that's great. It doesn't necessarily have to be limited to museums since we have so many of them. It could also be something, you know, practical, as long as its location and impression are maintained.  

E. S. Both of us have independently noticed something charming about the decay of these buildings, right? Take, for example, the Franciscan Church right behind us. In its terribly decayed state, it is actually my favorite church in the entire city. I don't particularly enjoy it when it's being restored with gold. There is something magical about walking down the street and seeing them. These buildings have survived for hundreds of years, enduring wars and everything. They are still standing. So, what if they are a bit beat up? One of my favorite things to do in Vilnius, as you go down the street, all of a sudden you can see, oh, there is a little entry into the backyard. I'm just going to go in there and check it out. It's a glimpse into a different time, perhaps resembling the year 1750 rather than 2023. Imagining what it was like back then is incredibly captivating.  

Speaking about the city, a crucial part is its people, the citizens who bring the city to life. They are actively changing the face of the city, for example, through the creation of wall paintings and engagement in similar activities.  

P. L. The modern history of Lithuania, you know, really begins in the early 90s. Since then, there has been a tremendous amount of change. It is embedded in the people here that they want to improve their surroundings and they aspire to something greater. There is plenty of room for growth, allowing for an incredible amount of creativity among the people. You can see it in the things like paintings on the walls, with their curious symbolism that you might not have previously considered. I find the artists and their sense of humor quite amusing. Just across the street, at the Museum of Modern Art, there's a little sculpture of this little guy sitting on the ground with his head inside a sphere. I'm curious about its meaning, but it's a simple and fun piece. I haven't seen anything quite like it before, and I think it's a great idea. Overall, there are many good ideas emerging from the creativity of this generation in Lithuania, specifically in Vilnius.  

Let's discuss architecture, engineering, and sustainability. The entire world is engaged in discussions about sustainability. Do you incorporate this mindset into your classes? In other words, do you recommend students to adopt a sustainable thinking approach to design?  

P. L. I believe that a significant part of what we do revolves around solving the challenges ahead of us, such as designing buildings. Sustainability sometimes appears to be more of a topic of conversation rather than a practice we actively engage in. However, I do notice a growing emphasis on sustainability amongst students. I can't say that I'm teaching necessarily very differently, but the students, whenever I go on trips with them, they are always very interested in hearing about projects related to sustainability and reducing carbon footprint. They discuss it more frequently and they want to work for companies that prioritize sustainability. It seems to be a generational shift that we need to embrace and move forward with.  

E. S. Peter teaches reinforced concrete, which is the worst material you could possibly use. Despite its drawbacks, it is still necessary to teach reinforced concrete because it is not going away. Although it is the source of many of our problems. In my own teachings, I focus on a more efficient structural approach, which involves curved structures. A curved structure, by its very nature similar to a hen's or chicken's egg, possesses high stiffness and thinness. This area is my specialty. However, we only touch upon it with the upper-level students at Cal Poly, and not extensively.  

P. L. I believe we also offer at least one course that focuses on repairing and upgrading buildings. In California, we avoid tearing down structures due to significant concerns regarding seismic activities like earthquakes. It poses a considerable challenge. However, it is technically possible to refurbish and repurpose old buildings. We dedicate a course to upgrading existing structures, either out of choice or due to cost-effectiveness compared to constructing new ones. There is also a push to design buildings a little bit more general, allowing for future repurposing, rather than being locked to a specific purpose. This way, instead of demolishing a building once its initial purpose is fulfilled, it can be repurposed for other uses. Sustainability and adaptability are on our minds.  

And for the final question, what are your plans moving forward with this school? Do you have any additional activities in mind for future visits to Vilnius? Have you discovered new ideas or approaches to incorporate into your classes or engage with the students? 

E.S. I think the academic program will remain the same for the next few years; we have no plans to make any changes. However, I do see improvements in the cultural program. We are now adding a visit to Tbilisi, which is exciting for us. Previously, we used to have two trips within Lithuania, so I anticipate that Nida or Palanga will continue to be part of the program next year. I think maybe next year we'll go to Kiev. Hope Ukraine will be free and thriving. Hope we'll go to Kiev next year. 

Related news

Interdisciplinarity in practice: how Electronics and Medical Engineering students developed a Human motion analysis system
Interdisciplinarity in practice: how Electronics and Medical Engineering students developed a Human motion analysis system
Modern engineering solutions are increasingly created through collaboration between specialists from different fields. The university environment provides an opportunity to combine diverse competencies and develop solutions that would be difficult to achieve within the boundaries of a single discipline. Such collaboration was also at the heart of a bachelor’s thesis project in which VILNIUS TECH students Laura Venckutė (Faculty of Electronics) and Abderrazak El Aamrani (Faculty of Mechanics) combined expertise in electronics and medical engineering to develop a human motion recognition and evaluation system. From an Idea to Interdisciplinary Collaboration At the beginning of the project, students from the Medical Engineering and Electronics Engineering study programmes sought to address a problem relevant to both sports and rehabilitation: the lack of accessible systems capable of automatically evaluating human movements and providing immediate feedback. As the project authors point out, incorrect movements can reduce training effectiveness and increase the risk of injuries during rehabilitation, sports activities, or everyday tasks. For this reason, they decided to look for a technological solution that could help objectively assess movement quality. The idea emerged from previous projects and experience gained during their studies, while an important catalyst was the opportunity for collaboration proposed by their supervisors. From the outset, it was clear that the project would require expertise from different fields, as motion analysis involves not only developing a technical system but also defining meaningful criteria for evaluating human movement. [caption id="attachment_120707" align="alignnone" width="2048"] Electronics and Medical Engineering students developed a Human motion analysis system[/caption] The students brought different, yet closely interconnected and complementary competencies to the project. The Electronics Engineering student was responsible for computer vision, embedded systems, and system integration, while the Medical Engineering student contributed expertise in biomechanics and human movement assessment. Although responsibilities were divided according to individual areas of expertise, key decisions were made collaboratively. From the Initial Concept to a Functional System In the early stages, the team planned to develop a system capable of analysing a broader range of movement patterns and performing more advanced analytical functions. However, as the project progressed, technical limitations, available hardware resources, and the scope of the bachelor’s thesis had to be taken into account. As a result, some ideas had to be abandoned. According to the team members, no major disagreements arose during the project. Decisions were made by discussing possible alternatives, evaluating how well they aligned with the project objectives, and, whenever possible, testing different approaches in practice. When technical and medical requirements conflicted, the team sought solutions that best balanced project goals and implementation constraints. The final outcome of the project is a human motion recognition and feedback system based on a pose estimation algorithm designed for basketball shooting analysis. The system detects a person in real time, estimates body posture, evaluates shooting technique according to biomechanical criteria, and subsequently provides feedback to the user. The Value of Interdisciplinarity and Future Opportunities During testing, the system performed better than expected. It successfully analysed the movements of users of different heights and maintained reliable performance at distances of up to 12 metres. According to the students, not only did the technical results exceed expectations, but the collaboration process itself also proved highly successful. In their view, such a project could theoretically be completed by a specialist from a single field. In practice, however, this would be difficult and inefficient. The project required both expertise in electronics and an understanding of human movement analysis. Without competencies from both fields, considerably more time would have been needed for learning unfamiliar topics and identifying appropriate solutions. Looking ahead, the students see opportunities to further develop the project by improving system stability, optimising resource usage, expanding the range of supported movement patterns, and increasing motion recognition accuracy. Although they are not yet certain whether they will continue working in this specific area, they hope to further deepen their expertise in related fields of technology and engineering. Supervisors’ Insights: Interdisciplinarity as a Foundation of Future Engineering The thesis supervisors emphasise that the nature of the project itself required collaboration across disciplines. However, the greatest value of the project lies not only in the technical solution that was developed, but also in the students’ ability to work together effectively. Professor Kristina Daunoravičienė, lecturer in the Medical Engineering study programme, notes that developing a human posture recognition and evaluation system requires both an understanding of human movement and biomechanics, as well as the ability to create a technical system capable of collecting, processing, and presenting information to the user. „The need for different knowledge and competencies made this topic an excellent platform for collaboration between Medical Engineering and Electronics Engineering students. Such projects foster not only technical solutions but also the ability to understand the logic, limitations, and priorities of other disciplines,“ says Prof. Dr Kristina Daunoravičienė. Although the students were initially unfamiliar with one another and came from different engineering backgrounds, a shared goal quickly became the foundation of successful cooperation. According to the supervisor, Medical Engineering contributed the perspective of human movement assessment and result interpretation, while Electronics Engineering provided expertise in system architecture, prototyping, and optimisation. According to Prof. Dr K. Daunoravičienė, the most important outcome of the project is not only the developed prototype and its comparison with the Xsens motion analysis system: „Equally important are the competencies of collaboration, communication, trust, initiative, and the ability to learn from one another. These are the qualities that allow good ideas to become real, functioning solutions.“ Associate Professor Dr Vytautas Abromavičius of the Faculty of Electronics also points out that in the era of artificial intelligence, technical expertise alone is no longer sufficient. Clear communication, the ability to understand specialists from different fields, and working together towards a common goal are becoming increasingly important. „This bachelor’s thesis demonstrated that our students communicated exceptionally well and were able to explain specialised professional terminology in a simple and understandable way. This mutual understanding enabled them to effectively combine knowledge from different disciplines and achieve an excellent result,“ says Assoc. Prof. Dr Vytautas Abromavičius. According to him, the need for interdisciplinary projects in modern engineering continues to grow. Every real-world product developed for the market consists of multiple interconnected components; therefore, a broader understanding of the problem leads to better product applicability and a more complete final outcome.
More
VILNIUS TECH Professor A. Čenys Represents Baltic States at Google Leadership Summit
VILNIUS TECH Professor A. Čenys Represents Baltic States at Google Leadership Summit
Prof. Antanas Čenys, a prominent researcher at VILNIUS TECH and the SustAInLivWork project, participated by personal invitation from Google in the exclusive Google for Education Higher Education Leader Series EMEA in London. Prof. Čenys was the only AI and cybersecurity expert from the Baltic countries to be personally invited to this high-level summit. The exclusive event brought together higher education leaders, technology pioneers, and innovation stakeholders from across Europe, the Middle East, and Africa. The summit focused on shaping the future of Artificial Intelligence, digital transformation, cybersecurity, and driving responsible innovation within the global academic and industrial landscapes. The insights and discussions from the London summit strongly resonate with the core mission of the SustAInLivWork project: strengthening Europe’s capacity to develop, deploy, and scale trustworthy AI solutions while simultaneously building the advanced skills, critical infrastructures, and innovation ecosystems required for a sustainable digital future. Through SustAInLivWork, VILNIUS TECH and its partners are actively delivering: An International AI Cluster: bridging the gap between research excellence, industry, and public sector stakeholders; Advanced Innovation Services: driving AI and data-driven solutions for various sectors; AI Skills Development: establishing lifelong learning opportunities and specialized training; Cross-Regional Collaboration: accelerating practical AI adoption and ensuring positive societal impact. The summit also underscored the rapidly growing importance of cybersecurity as a fundamental pillar for secure AI deployment. This focus perfectly aligns with ongoing initiatives led by VILNIUS TECH, including specialized cybersecurity skills development programmes supported by Google.org, aimed at strengthening digital resilience and cyber competence across Europe. As Europe accelerates its comprehensive AI transformation, structured collaboration between universities, industry leaders, policymakers, and major technology providers becomes increasingly paramount. SustAInLivWork and VILNIUS TECH remain committed to contributing to this evolutionary journey by building strong bridges between cutting-edge research, thriving innovation ecosystems, and sustainable societal progress.
More