Dissertation topics in Materials Engineering science field:
Developing and investigating serviceability performance of the coating resistant to alkali corrosion for aluminosilicate refractories
Dr Valentin Antonovič (Publications)Effect of additives on the properties and structure of building bio composite with fibre hemp shiv and mixed mineral binder
Dr Giedrius Balčiūnas (Publications)
Synthesis of metallic 2D-3D nanostructures, using DNA-based templates, and investigation of their application in nanoplasmonics
Assoc. Prof. Dr Ingrida Bružaitė (Publications)Formation and investigation of physical properties of Fe-Ni-Co powders surface formed by selective laser melting and alloyed with carbide ceramics
Assoc. Prof. Dr Olegas Černašėjus (Publications)
Investigation and control of electric properties of YBCO devices by means of light, electric current and temperature
Prof. Dr Artūras Jukna (Publications)
Research of plant-based fillers impact on the structure formation and performance of biopolyurethane foam composite
Dr Agnė Kairytė (Publications)
Research of structure and durability of modified clays
Dr Olga Kizinievič (Publications)
Investigations of acoustic properties of composite construction products and evaluation of application possibilities to ensure acoustic comfort
Assoc. Prof. Dr Marius Marius Mickaitis (Publications)
Improvement of charge transfer in microbial fuel cell by nanomaterials
Dr Inga Morkvėnaitė-Vilkončienė (Publications)
Improvement of charge transfer in microbial fuel cell by nanomaterials
Dr Inga Morkvėnaitė-Vilkončienė (Publications)
Investigation of the structure and properties of fine-grained concrete disperse reinforced with ecological cellulose fibers made from waste
Prof. Dr Džigita Nagrockienė (Publications)
Effect of modifying additives and hemp shives aggregates on the structure and exploitation properties of clay composite
Dr Jolanta Pranckevičienė (Publications)
Effect of modifying additives and hemp shives aggregates on the structure and exploitation properties of clay composite
Dr Jolanta Pranckevičienė (Publications)
Development of fiber-reinforced polymer composites using additive manufacturing techniques and investigation of environmental effects on their mechanical performance
Dr Arvydas Rimkus (Publications)
Modification of the active surface area of tactile sensors with electrically conductive polymers
Dr Urtė Samukaitė-Bubnienė (Publications)
Influence of sulfate and magnesium phases on cement paste shrinkage deformation during hardeningModification of the active surface area of tactile sensors with electrically conductive polymers
Dr Urtė Samukaitė-Bubnienė (Publications)
Assoc. Prof. Dr Gintautas Skripkiūnas (Publications)
Research and development of environmentally friendly refractory material
Dr Rimvydas Stonys (Publications)
Improvement of surface properties of PHBV (poly(3-hydroxybutyrate-co-3-hydroxyvalerate)) carcass using the hydrophobin coatings
Dr Jaunius Urbonavičius (Publications)
Investigation of the elements of biosensors based on electrostatic microstructures
Assoc. Prof. Dr Darius Viržonis (Publications)
Research of properties of joints of microcomposite conductors welded by pressurInvestigation of the elements of biosensors based on electrostatic microstructures
Assoc. Prof. Dr Darius Viržonis (Publications)
Assoc. Prof. Dr Nikolaj Višniakov (Publications)
Investigations of foam glass granules additives on the properties and structure of building ceramics
Investigations of foam glass granules additives on the properties and structure of building ceramics
Dissertation topics in Materials Engineering science field by VILNIUS TECH departments:
Department of Building Materials and Fire Safety
Investigation of the structure and properties of fine-grained concrete disperse reinforced with ecological cellulose fibers made from waste
Prof. Dr Džigita Nagrockienė (Publications)
Prof. Dr Džigita Nagrockienė (Publications)
Influence of sulfate and magnesium phases on cement paste shrinkage deformation during hardening
Assoc. Prof. Dr Gintautas Skripkiūnas (Publications)
Investigations of foam glass granules additives on the properties and structure of building ceramics
Assoc. Prof. Dr Ramunė Žurauskienė (Publications)
Department of Chemistry and Bioengineering
Synthesis of metallic 2D-3D nanostructures, using DNA-based templates, and investigation of their application in nanoplasmonics
Assoc. Prof. Dr Ingrida Bružaitė (Publications)
Improvement of surface properties of PHBV (poly(3-hydroxybutyrate-co-3-hydroxyvalerate)) carcass using the hydrophobin coatings
Dr Jaunius Urbonavičius (Publications)
Assoc. Prof. Dr Ingrida Bružaitė (Publications)
Improvement of surface properties of PHBV (poly(3-hydroxybutyrate-co-3-hydroxyvalerate)) carcass using the hydrophobin coatings
Dr Jaunius Urbonavičius (Publications)
Department of Mechanical and Material Engineering
Formation and investigation of physical properties of Fe-Ni-Co powders surface formed by selective laser melting and alloyed with carbide ceramics
Assoc. Prof. Dr Olegas Černašėjus (Publications)Research of properties of joints of microcomposite conductors welded by pressure
Department of Mechatronics, Robotics and Digital Manufacturing
Improvement of charge transfer in microbial fuel cell by nanomaterials
Dr Inga Morkvėnaitė-Vilkončienė (Publications)
Modification of the active surface area of tactile sensors with electrically conductive polymers
Dr Urtė Samukaitė-Bubnienė (Publications)
Investigation of the elements of biosensors based on electrostatic microstructures
Assoc. Prof. Dr Darius Viržonis (Publications)
Dr Inga Morkvėnaitė-Vilkončienė (Publications)
Modification of the active surface area of tactile sensors with electrically conductive polymers
Dr Urtė Samukaitė-Bubnienė (Publications)
Investigation of the elements of biosensors based on electrostatic microstructures
Assoc. Prof. Dr Darius Viržonis (Publications)
Department of Physics
Investigation and control of electric properties of YBCO devices by means of light, electric current and temperature
Prof. Dr Artūras Jukna (Publications)
Prof. Dr Artūras Jukna (Publications)
Department of Reinforced Concrete Structures and Geotechnics
Investigations of acoustic properties of composite construction products and evaluation of application possibilities to ensure acoustic comfort
Assoc. Prof. Dr Marius Marius Mickaitis (Publications)
Assoc. Prof. Dr Marius Marius Mickaitis (Publications)
Department of Steel and Composite Structures
Development of fiber-reinforced polymer composites using additive manufacturing techniques and investigation of environmental effects on their mechanical performance
Dr Arvydas Rimkus (Publications)
Dr Arvydas Rimkus (Publications)
Laboratory of Concrete Technologies
Effect of modifying additives and hemp shives aggregates on the structure and exploitation properties of clay composite
Dr Jolanta Pranckevičienė (Publications)
Dr Jolanta Pranckevičienė (Publications)
Laboratory of Composite Materials
Developing and investigating serviceability performance of the coating resistant to alkali corrosion for aluminosilicate refractories
Research and development of environmentally friendly refractory material
Dr Rimvydas Stonys (Publications)
Dr Rimvydas Stonys (Publications)
Laboratory of Thermal Insulating Materials and Acoustics
Effect of additives on the properties and structure of building bio composite with fibre hemp shiv and mixed mineral binder
Dr Giedrius Balčiūnas (Publications)
Research of plant-based fillers impact on the structure formation and performance of biopolyurethane foam composite
Dr Agnė Kairytė (Publications)
Dr Giedrius Balčiūnas (Publications)
Research of plant-based fillers impact on the structure formation and performance of biopolyurethane foam composite
Dr Agnė Kairytė (Publications)
-
- Page administrators:
- Vaiva Miškinytė
- Alina Kvietkauskienė
- Vida Sviackevičienė
- Jelena Kabulova
- Jurgita Kunigonienė
- Daiva Versekėnienė
- Kristina Lazickienė
- Augustė Jablonskytė
- Darius Tarasevičius
- Agnė Augustinaitė