Courses taught in English for 2026-2027 Spring Semester

Annotation of Course

Students will be able to analyze battery thermal management systems used in electric vehicles and their operating principles, evaluate the impact of temperature on battery efficiency, lifespan, and safety, classify different thermal management methods, develop a computer model of a battery thermal management system, and perform simulations of various control strategies. Students will also be able to assess the influence of different temperature control methods on battery temperature regulation, compare the obtained simulation results according to selected criteria, and formulate scientifically based conclusions and recommendations.

Students are required to complete at least 80% of the laboratory work scheduled in the timetable.
Students are required to attend at least 50% of the theoretical lectures according to the scheduled timetable.

Aim of Course

Gain knowledge of principles, structure, elements and applications of automatic control devices and systems, acquire skills in experimental investigation of control systems.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -45
Practical works -0
Laboratory works – 15
Consultations -4
Individual work -96
Part-time studies:
Lectures -16
Practical works -0
Laboratory works – 6
Consultations -4
Individual work -134

Annotation of Course

In this subject the fundamentals, approaches, methods and algorithms of digital signal processing are presented. The abilities to program digital signal processing (DSP) algorithms using MATLAB software and qualified application of it are acquired in this subject. Facilities to combine theoretical and practical elements of the discrete time systems are assured during the time, spend in laboratory. Lecture schedule.Individual study of the literature during the preparation to the exam and laboratory tasks acquires cognitive abilities to work individually and apply DSP theory in practical situations. Abilities to work independently and responsibly are acquired thoroughly schedule own work tasks and time. Students must complete all scheduled laboratory work. Students must attend at least 80% of the course laboratory and at least half of the lectures according to the semester schedule.

Aim of Course

The aim is to acquire knowledge on the fundamentals of DSP, to assure abilities to design and implement digital filters and analyse discrete-time signals in time and frequency domains using approaches, and algorithms of DSP by means of computer.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -45
Practical works -0
Laboratory works – 15
Consultations -4
Individual work -96

Annotation of Course

Principles of automatic control. Linear, nonlinear, pulse-based, and adaptive automatic control systems. Electronic, electromechanical, hydromechanical, and pneumomechanical control systems: their theoretical foundations, design, operation, and fields of application.
Students must complete at least 80% of the laboratory assignments according to the scheduled timetable.
Students must attend at least 50% of the theoretical lectures according to the scheduled timetable.

Aim of Course

Gain knowledge of principles, structure, elements and applications of automatic control devices and systems, acquire skills in
experimental investigation of control systems.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -33

Annotation of Course

Electrotechnics is a course that introduces the fundamental principles of electrical circuits, electrical energy generation, transmission, and utilization. The course covers the laws governing direct current (DC) and alternating current (AC) circuits, electrical measurements, electrical machines, transformers, and electrical equipment. Students learn to analyze electrical circuits, apply basic electrical engineering calculation methods, use measurement instruments, and solve practical engineering problems. Laboratory work develops hands-on skills in working with electrical equipment and promotes safe working practices in electrical engineering environments.
Students are required to attend at least 50% of the theoretical lectures according to the scheduled timetable.
tudents must complete at least 80% of the laboratory assignments during the scheduled class times.

Aim of Course

Provide knowledge about linear DC, AC single-phase and three-phase circuits, transients in linear DC and AC circuits, magnetic circuits. Develop the ability to experimentally investigate and develop these circuit using various methods.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -33
Part-time studies:
Lectures -10
Practical works -0
Laboratory works – 8
Consultations -2
Individual work -60
Part-time, distance learning studies:
Lectures -16
Practical works -0
Laboratory works – 8
Consultations -0
Individual work -56

Annotation of Course

The module is designed to get acquainted with the basic laws and devices of electrical engineering and electronics. BIM capabilities in electrical engineering.
at least half of the lectures at the scheduled times

Students must complete at least 80% of the laboratory work in the time provided in the schedule.

Aim of Course

Provide electrical engineering knowledge, develop the ability to creatively analyse and solve electrical issues.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -33
Part-time, distance learning studies:
Lectures -10
Practical works -0
Laboratory works – 8
Consultations -2
Individual work -60

Annotation of Course

Basic concepts of electrical circuits. Direct current circuits laws, algebraic methods for circuit analysis. Circuit’s properties, characteristics, change. One-ports. Sinusoidal electric values, main characteristics, phasors diagrams. Idealized circuit elements.

Series and parallel connection of elements. Voltage and current resonances. Analysis of sinusoidal electric circuits. Alternating circuit power. Energy Supply. Mutual inductance circuits. Three-phase circuits: connection modes, analysis.
Students must attend at least 80 per cent of the practical exercises (practical work)during the scheduled time;
Students must complete at least 80% of the laboratory work during the scheduled time;
Students must complete all scheduled laboratory work.
at least half of the lectures at the scheduled times.

Aim of Course

Provide knowledge about linear direct current circuits, single-phase alternating current circuits and three-phase cir-cuits; develop the ability to apply the acquired knowledge in engineering activities; acquire the experience of practi-cal investigation, develop the abilities to analyze electric circuits; develop the abilities to analyze electric circuits using computer; acquire the ability to work individually and in group.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -15
Laboratory works – 15
Consultations -4
Individual work -96

Annotation of Course

Resistive, inductive, capacitor, photoelectric gauges used in power electronics. DAC and ADC. Microprocessors and use of him for processing the information and control.

Aim of Course

To analyze principles of work of gauges and converters, to be able to project circuits of the automated measurement and control.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -28
Practical works -15
Laboratory works – 0
Consultations -2
Individual work -115

Annotation of Course

Module covers the theory of the control of the electrical systems, system operation mode planning, respective reglaments and standards, the power flow distribution tasks are overviewed and the skills to practically determine and select the electrical system components, based on the analytical and mathematical modelling are developed.

Aim of Course

Provide knowledge about control of electrical systems, elevate the practical skills to select and calculate the components of the electrical systems, optimize the power flow in electrical energetics systems.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -42
Practical works -0
Laboratory works – 0
Consultations -3
Individual work -115

Annotation of Course

Basic concepts of electrical circuits. Direct current circuits laws, algebraic methods for circuit analysis. Circuit’s properties, characteristics, replacing. Two-ports. Sinusoidal electric values, main characteristics, phasors diagrams. Idealized circuit elements. Series and parallel connection of elements. Voltage and current resonances. Analysis of sinusoidal electric circuits. Alternating circuit power. Energy Supply. Mutual inductance circuits. Three-phase circuits: connection modes, analysis.
Students must complete at least 80% of the laboratory work during the scheduled time.
At least half of the lectures at the scheduled times.

Aim of Course

Provide knowledge about linear direct current circuits, single-phase alternating current circuits and three-phase circuits; develop the ability to apply the acquired knowledge in engineering activities; acquire the experience of practi-cal investigation, develop the abilities to analyze electric circuits; develop the abilities to analyze electric circuits using computer; acquire the ability to work individually and in group.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -15
Laboratory works – 15
Consultations -4
Individual work -96
Part-time, distance learning studies:
Lectures -18
Practical works -8
Laboratory works – 8
Consultations -16
Individual work -110

Annotation of Course

PLC definition, design, structure, operation, software tools and the structure of the programming components, the IEC 61131 standard programming language.
Students must complete at least 80% of the laboratory assignments during the scheduled class times.
Students are required to attend at least 50% of the theoretical lectures according to the scheduled timetable.

Aim of Course

Gaining theoretical and practical knowledge about modern programmable logic controller types, structure, programming and application of automated systems and mechatronic systems.
Students must attend at least 80 per cent of the practical exercises (practical work)during the scheduled time;
Students must complete at least 80% of the laboratory work during the scheduled time;
Students must complete all scheduled laboratory work.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -24
Practical works -0
Laboratory works – 12
Consultations -2
Individual work -42
Part-time studies:
Lectures -10
Practical works -0
Laboratory works – 8
Consultations -8
Individual work -54

Annotation of Course

During the course, students will become familiar with potential threats posed by electrical energy to human health during the operation of engineering-purpose electrical equipment. They will learn to identify possible risks to human health when designing newly constructed engineering facilities and during the operation of existing electrical power generation, transmission, and distribution systems. Students will be able to apply organizational and technical methods of safe work organization when working at a distance from, near, or on live electrical installations and power networks.
Students will know and systematically understand the essential theoretical and applied foundations and concepts of people safety and related electronics and electrical engineering study fields. They will be able to apply technical and organizational measures for safe work organization. The ability to experimentally investigate the application of technical safety measures will be developed. Students will understand the importance of occupational and fire safety and their fundamental requirements.
Students must complete at least 80% of the laboratory work according to the schedule.
The minimum attendance requirement for the module is 50%.

Aim of Course

To provide knowledge about legal – normative work safety organization principles, electric current hazard criterias and safety measures, work environment design key indicators, occupational risk assessment aspects, accident investigation and accounting, fire safety organization principles, to apply the acquired knowledge in solving engineering management issues, to develop broad expertise, to have an ability to critically analyze and develop creative solutions for professional challenges.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -15
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -48
Part-time, distance learning studies:
Lectures -18
Practical works -0
Laboratory works – 8
Consultations -8
Individual work -46

Annotation of Course

at least half of the lectures at the scheduled times

Aim of Course

Provide knowledge about linear DC, AC single-phase and three-phase circuits, transients in linear DC and AC circuits, magnetic circuits. Develop the ability to experimentally investigate and develop these circuit using various methods.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -33
Part-time studies:
Lectures -10
Practical works -0
Laboratory works – 8
Consultations -2
Individual work -60
Part-time, distance learning studies:
Lectures -16
Practical works -0
Laboratory works – 8
Consultations -0
Individual work -56

Annotation of Course

In the module, you will become acquainted with the basic principles of electrical engineering, learn methods of circuit connection. You will be able to distinguish between direct current and alternating current. You will familiarize yourself with digital electronic devices and their operating principles. You will learn to be friends with electricity.
Students must complete at least 80% of the laboratory work during the scheduled time.
Students must complete all scheduled laboratory work.

Aim of Course

To master basic laws of electronics and electrical engineering, principles of working of electrical and electronics devices and equipment’s, to develop abilities for the independent decision of electrical engineering questions, to understand principles of work digital electronics devices and areas of their application.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -33
Part-time studies:
Lectures -8
Practical works -0
Laboratory works – 6
Consultations -14
Individual work -52

Annotation of Course

Principle of operation of electronic converters, analysis and design energy systems are described.

Aim of Course

To acquire the knowledge and competence in electronic converters, planning, design and operation.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -42
Practical works -15
Laboratory works – 0
Consultations -3
Individual work -180

Annotation of Course

Students acquire knowledge of the principles of automatic control system design, including open-loop and closed-loop systems, disturbance compensation systems, and feedback control systems based on controlled variables. The course covers the fundamentals of mathematical modeling, including differential equations of linear systems, the development of time-response characteristics, Laplace transformation, transfer functions, and system stability analysis using algebraic and frequency-domain stability criteria (Mikhailov and Nyquist criteria) as well as the Bode diagram method. Students also gain knowledge required for system synthesis, including the design principles of proportional (P), integral (I), proportional-integral (PI), and proportional-integral-derivative (PID) controllers, as well as compensating networks. In addition, the course introduces transient response modeling and simulation using MATLAB software tools.

Students are required to attend at least 80% of practical classes according to the scheduled timetable.

Students are required to complete at least 80% of the laboratory work according to the scheduled timetable.

Students are required to attend at least 50% of the theoretical lectures according to the scheduled timetable.

Aim of Course

Provide knowledge about design and analysis strategies of automatic control systems, design controllers matching specifications of closed loop control system, acquire ability to apply those for control of various dynamic systems and be able to use advanced informational technologies for assessment results of automatic control systems synthesis and analysis.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -15
Laboratory works – 15
Consultations -4
Individual work -96

Annotation of Course

In the Computer Peripherals subject knowledge about data communication principles, data communication systems and their characteristics, protocols and protocols architecture, interfaces for PC and peripheral devices, data encoding and modulation techniques, serial data interfaces, microcontroller interfacing techniques, IrDA and Bluetooth technology, modems and power supply units is provided.
Students are required to attend all theoretical lectures, with attendance exceeding 50% over the course of the semester. Students must complete all assigned laboratory work, with at least 80% of these tasks completed as scheduled.

Aim of Course

Learn to develop, improve and apply the modern tools of communication and interaction between computers and various hardware components, so that they can exchange data, communicate with each other and send messages and commands, develop the ability to apply the acquired knowledge in engineering practice.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -33

Annotation of Course

The knowledge about the main microcontroller families and their characteristics are obtained in the course of Microcontrollers and their Programming. The PIC18 microcontroller family has been studied. The representative of this family microcontroller PIC18F47K42 is studied in details. The development board dedicated to the design of electronic equipments based on the PIC18 family microcontrollers and C compiller MicroC PRO for PIC used for the creating of PIC microcontroller programs using C programming language have been studied as well. The development of concrete microcontroller programs dedicated to the processing of the analogue signals transmitted by the sensors and programs that are used for the time measurement, which can be employed during the research work, is studied.
Students must complete no less than 80% of the scheduled laboratory works

Aim of Course

To learn the principles of development of microcontroller-based devices dedicated to the scientific investigations. To choose the microcontroller and other elements for the microcontroller-based devices and to create the microcontroller programs using C programming language. To be able to substantiate solutions working individually or in the team

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -28
Practical works -0
Laboratory works – 30
Consultations -2
Individual work -180

Annotation of Course

In Databases course the main database (DB) design phases, the canonical schemes and principles of their creation and use are presented. The focus is on the management of relational databases. Briefly discussed the models of DB logical structure, operations of relational algebra and the SQL language, used for their description. The design of relational databases is trained. Self-sufficiency and responsibility during studying, the thoroughness of work and time planning is trained.
Students are required to attend all theoretical lectures, with attendance exceeding 50% over the course of the semester. Students must complete all assigned laboratory work, with at least 80% of these tasks completed as scheduled.

Aim of Course

To understand the physical, conceptual and logical database (DB) organization. Learn to design relational DB and their support, learn relational algebra and relational computing language SQL.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -15
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -48
Part-time, distance learning studies:
Lectures -10
Practical works -0
Laboratory works – 10
Consultations -2
Individual work -58

Annotation of Course

In the microprocessors course knowledge about microprocessor systems, their creation principles and architectures, concepts of microprocessors, general and special purpose microprocessors structures, their operation principle, data and instruction formats, operand addressing modes, memory organization, instruction set, and modern microprocessors technologies are provided.
Students are required to attend all theoretical lectures, with attendance exceeding 50% over the course of the semester. Students must complete all assigned laboratory work, with at least 80% of these tasks completed as scheduled.

Aim of Course

To provide students with sufficient knowledge about general and special purpose microprocessors, to develop the need to be interested in microprocessor systems programming, to develop the ability to apply the acquired knowledge in engineering practice and to develop the ability to maintain their professional competence through lifelong learning.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 30
Consultations -4
Individual work -96
Part-time studies:
Lectures -8
Practical works -0
Laboratory works – 8
Consultations -14
Individual work -130

Annotation of Course

Computer engineering practicum delivers knowledge and practical skills about circuit schematic component and footprint library creation, circuit schematic design, printed circuit board design, soldering and assembling, and about advanced printed circuit board design.
Students must complete all assigned laboratory work, with at least 80% of these tasks completed as scheduled.

Aim of Course

The aim of this course is to understand the operation of semiconductor devices, to design electronics circuits and printed circuit boards, to perform assembly, testing and research of these printed circuits boards.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -0
Practical works -0
Laboratory works – 30
Consultations -2
Individual work -48

Annotation of Course

Propositional Calculus, Truth Table, Logical Circuits, Predicate Calculus, Predicate and Quantifiers, De Morgan laws, Statements with Quantifiers, Elementary Number Theory, Proof Theory, Methods of Proof, Contradiction and Contraposition, Algorithms, Sequences, Mathematical Induction, and Recursion, Correctness of Algorithms, Recursion of Sequences, Set Theory, Operations on Sets, Boolean Algebras, Russell’s Paradox, Efficiency of Algorithms, Analysis of Algorithms’ Complexity.
Students are required to attend all theoretical lectures, with attendance exceeding 50% over the course of the semester. Students must complete all assigned practical work, with at least 80% of these tasks completed as scheduled.

Aim of Course

To acquaint students’ with basic concepts of computer logic and develop ability to solve typical problems of discrete mathematics.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -15
Practical works -15
Laboratory works – 0
Consultations -2
Individual work -48
Part-time, distance learning studies:
Lectures -8
Practical works -8
Laboratory works – 0
Consultations -8
Individual work -56

Annotation of Course

Microwave technologies subject gives knowledge about propagation of radio waves around Earth surface, elementary and real antennas, microwave transmission lines.
Students are required to attend all theoretical lectures, with attendance exceeding 50% over the course of the semester. Students must complete all assigned laboratory work, with at least 80% of these tasks completed as scheduled.

Aim of Course

To soak up peculiarities of microwave band, pick up to design antennas, microwave transmission lines with due properties, make reasoned solutions on one’s own and with group.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -33

Annotation of Course

Digital system description languages VHDL, Verilog and SystemC. System design and modeling at structural, register transfer and functional levels. Designed systems analysis and synthesis using ASIC or programmable logic technological libraries. System testbench implementation using VHDL, Verilog and SystemC language features. Top-down design strategy. Bottom-up design strategy. Mixed design strategies. Complex system design and implementation using different design strategies. Practical digital system architectures, components, internal communication, design tools, implementation problems and testing. Digital system analysis and defect detection.
Students must complete no less than 80% of the scheduled laboratory works

Aim of Course

Learn digital system design languages VHDL, Verilog, SystemC and use them to design and implement complex digital devices.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -28
Practical works -0
Laboratory works – 15
Consultations -2
Individual work -115

Annotation of Course

Acquiring knowledge of the key technological processes for embedded computers(EC) and systems manufacturing technologies: methods of formation geometry components by lithografies and wet and dry removal processes, doping an deposition,
interconnection and packing technologies, challenges of microtechnologies and future features and developed abilities to analyze and simulate microtechnology processes and EC elements.
Students are required to attend all theoretical lectures, with attendance exceeding 50% over the course of the semester. Students must complete all assigned laboratory work, with at least 80% of these tasks completed as scheduled.

Aim of Course

Teach to understand, analyze and simulate processes of microtechnologies and develop skills to choose a reasoned decision, an independent or in group

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -24
Practical works -0
Laboratory works – 12
Consultations -2
Individual work -42

Annotation of Course

The study module of microcontroller systems provides knowledge about 8 and 32 bit microcontrollers. The architecture of microcontrollers is discussed in details: kernel, registers, memory types, general purpose and specific pins, interrupts, timers-counters, analog to digital converters. The communication interfaces are also presented in details. The programming of peripheral devices such as sensors, displays, external memories, is discussed. Students must complete all scheduled laboratory work. Students must attend at least 80% of the course laboratory and at least half of the lectures according to the semester schedule.

Aim of Course

To provide students with sufficient knowledge of microcontroller architecture and programming and to develop the ability to apply that knowledge in engineering activities. To develop the need to seek for the knowledge of programming of embedded systems. To develop the ability to maintain their professional competence by life-long learning.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 30
Consultations -4
Individual work -98

Annotation of Course

The study subject provides an introduction to image recognition, explaining the analogy of computer vision system and biological vision system operation, image sensor operation and types, image formation and color models. The subject analyzes the methods of image preprocessing, noise reduction, fast image analysis operations, features of color image analysis, image features, geometric transformations of images, creation of panoramic photos. Theoretically and during practical classes, the principles of image classification, object recognition in images, image segmentation are analyzed. The subject also provides knowledge about the advanced principles such as image style transfer, colorization, reconstruction, superexpression and image synthesis. Examples from different applications are provided: face detection and recognition; optical character recognition; recognition of license plates and road signs; detection of objects of interest and determination of their movement in image sequences. During the practical work of the subject, modern software MATLAB, OpenCV, PyTorch, Tensorflow are applied. Students must complete all scheduled laboratory work. Students must attend at least 80% of the course laboratory and at least half of the lectures according to the semester schedule.

Aim of Course

To get familiar with image analysis systems, methods and algorithms used in them and the basic principles of their implementation using modern software.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -45
Practical works -0
Laboratory works – 15
Consultations -4
Individual work -96

Annotation of Course

Introduction. Semiconductor diodes. Bipolar transistors. Field effect transistors. Thyristor devices. Semiconductor integrated circuits technology. Bulk and surface acoustic wave devices. Optoelectronic devices. Display devices. Summary. Attendance at theoretical lectures is mandatory, and to qualify for sitting the exam in the first take, students must have recorded attendance of at least 50% of the lectures. Students are required to complete all prescribed practical (exercise) assignments and must attend at least 80% of practical sessions according to the scheduled timetable.

Aim of Course

Providing knowledge of matematics and physics and ability to apply knowledge in design and optimization of electronic devices. Providing knowledge of modern electronic devices and their applications in various fields of science and technology. Preparation for further studies of electronic circuits and other subjects.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 0
Consultations -2
Individual work -48
Part-time, distance learning studies:
Lectures -20
Practical works -0
Laboratory works – 0
Consultations -2
Individual work -58

Annotation of Course

Interfaces of applications of superposition priciple with frequency characteristics of circuits, frequency characteristics of bipolar and quadripolar, frequency characteristics of RR, RC and RL, circuits which are connected in cascade, features of resonant circuits, quadripolars and their empty running, short operation and general parameters, electrical filters, circuits of distributed parameters. Students must complete all scheduled laboratory work. Students must attend at least 80% of the practical exercises (practical work) and at least half of the lectures according to the semester Lecture schedule.

Aim of Course

To provide basic knowledge of linear circuits, to develop the ability to analyze, design and apply linear circuits in order to process simple forms signals and to be able to select the solutions reasonably by working independently or in a group.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -45
Practical works -15
Laboratory works – 0
Consultations -4
Individual work -96

Annotation of Course

Introduction. Semiconductor diodes. Bipolar transistors. Field effect transistors. Thyristor devices. Semiconductor integrated circuits technology. Bulk and surface acoustic wave devices. Optoelectronic devices. Display devices. Summary. Attendance at theoretical lectures is mandatory, and to qualify for sitting the exam in the first take, students must have recorded attendance of at least 50% of the lectures. Students are required to attend theoretical lectures – more than 50% of them must be attended during the semester. Students must complete all scheduled exercises. Students must attend at least 80% of exercises during the scheduled time.

Aim of Course

Providing knowledge of matematics and physics and ability to apply knowledge in design and optimization of electronic devices. Providing knowledge of modern electronic devices and their applications in various fields of science and technology. Preparation for further studies of electronic circuits and other subjects.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -30
Practical works -0
Laboratory works – 0
Consultations -2
Individual work -48
Part-time, distance learning studies:
Lectures -20
Practical works -0
Laboratory works – 0
Consultations -2
Individual work -58

Annotation of Course

Provide explanations of concepts, terms and basics of computer architecture that are employed to develop digital technologies and digital hardware. Counting systems and coding, attributes of command system, processor and memory system basics are explained. Concepts, terms and basics are explained using problem based learning. The pros and cons are given of thins under consideration.
Students must complete all scheduled laboratory work. Students must attend at least 80% of the course laboratory and at least half of the lectures according to the semester Lecture schedule.

Aim of Course

Provide explanations of concepts, terms and basics of computer architecture that are employed to develop digital technologies and digital hardware.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -45
Practical works -0
Laboratory works – 15
Consultations -4
Individual work -96
Part-time, distance learning studies:
Lectures -10
Practical works -10
Laboratory works – 10
Consultations -4
Individual work -126

Annotation of Course

In Modern electrical engineering discipline students gain knowledge in principles of operation of modern electrical engineering equipment and smart electric grids, analysis and design.

Aim of Course

To acquire the knowledge and competence in modern electrical engineering, analisys, design and operation of modern electric systems.

Distribution of course hours by study forms and ways

Full-time studies:
Lectures -42
Practical works -0
Laboratory works – 0
Consultations -3
Individual work -115